Rear Bumper PRO-Line for Toyota Tundra 2014-2021

Upgrade your 2014–2021 Toyota Tundra with a BMS PRO-Line rear bumper built to add steel protection, cleaner recovery access, and better clearance where the factory bumper comes up short.

The Tundra has the size, power, and rugged feel of a real full-size pickup, but the factory plastic rear bumper does not always match that character. A careless bump in traffic, a bad reverse maneuver, or a hidden rock off the road can quickly turn the rear end into a repair job. That weakness becomes even more noticeable when the truck is used for weekend trips, camping, or rough access roads.

The BMS PRO-Line steel rear bumper gives the truck a stronger rear setup without making it look out of place. It helps protect the back of the Tundra better than the factory bumper and improves the rear departure angle, so the truck is less likely to drag the bumper on steep exits, uneven ground, rocky sections, or water crossings.

Built-in recovery points with heavy-duty D-ring mounts provide a solid rear connection point for compatible shackles and recovery gear. When the truck needs help – or when another vehicle does – you do not have to search underneath the pickup for a factory tow point.

The bumper keeps full tailgate function, so everyday bed access stays simple. The center section doubles as an integrated step, making it easier to reach tools, cargo, or outdoor gear and secure your load before heading out.

For Tundra owners who want more than a cosmetic change, the BMS PRO-Line aftermarket rear bumper adds practical strength, recovery function, and a tougher, more complete look that fits the truck’s purpose on pavement and off road.

PRODUCT DETAILS:

Laser cut for accuracy and precision
Manufacturer Part Number: BMS060100
Application: Toyota Tundra 2014-2021 2nd generation, 2nd facelift
Installation method: requires cutting the upper bar of the OEM tow hitch
Mounting kit: included
Features of the complete set: The set includes an off-road bumper, mounting brackets, bolt kit, certificate of conformity, and license plate light
Winch mount: not present. Winch installation is possible only after major custom vehicle modifications
Fairlead stencil: present
Light slots: 2 slots, WxHxD: 81.6×75.6×83.8 mm
Slots for parktronic sensors: present as a stencil
Hi-Lift jack points: not present
Package size: 215x38x62 cm
Package weight: 47 kg

TECH SPECS:

Color: Black powder coating finish
Bumper material: 4 mm steel A 516-55
Brackets material: 6 mm steel A 516-55

FAQ

Why install a heavy duty rear bumper on a Toyota Tundra?

The BMS PRO-Line rear bumper is a smart upgrade when you want more rear-end protection and better departure clearance from your Toyota Tundra. The steel construction is better suited for contact with trail obstacles than the factory plastic bumper, and the improved rear departure angle helps reduce dragging on dirt roads, rocky sections, and uneven terrain. Many owners replace the factory rear bumper after it has already been damaged, but adding protection ahead of time makes more sense.

Does this bumper fit the 2014–2021 Toyota Tundra?

Yes. The BMS PRO-Line rear bumper is designed specifically for the facelifted second-generation Toyota Tundra 2014–2021. Other model years may require a different bumper, so check the correct BMS Engineering application before ordering.

Is body drilling required for installation?

No body drilling is required. However, installation does require trimming the upper bar of the factory tow hitch assembly. This should be done carefully during installation to ensure proper fitment.

Will the tailgate still open normally?

Yes. The tailgate opens normally with the BMS PRO-Line bumper installed. You can keep using the bed for cargo, tools, recovery gear, and everyday truck tasks without changing how the tailgate works.

Will the factory parking sensors still work?

Yes. The factory parking sensors can be transferred into the new rear bumper. The sensor locations are covered with template plugs from the factory. If parking sensors are not installed, the plugs can stay in place to keep the bumper looking clean.

Can I recover or pull the Toyota Tundra using this bumper?

Yes. The BMS PRO-Line bumper includes built-in recovery points with heavy-duty D-ring mounts. They give you a convenient rear connection point for compatible shackles and recovery gear, so you do not have to search underneath the truck for a factory tow point. Always use properly rated recovery equipment and keep the pull as straight as possible.

Can I install a winch in this rear bumper?

This rear bumper does not include a standard winch mount. Installing a rear winch would require major custom fabrication, so it should be considered separately and discussed with an experienced installer before starting the build.

Can I install auxiliary lights in the rear bumper?

Yes. The BMS rear bumper has two mounting locations for auxiliary lights. They can be useful for improving rear visibility when backing up, maneuvering in the dark, setting up camp, or working around the truck bed.

Can this bumper be used on public roads?

This is an aftermarket rear bumper, and road-use rules can vary by location. If your Toyota Tundra is driven on public roads, check your local requirements before installation.

Will this bumper prevent damage in a collision?

It depends on the impact. The BMS PRO-Line steel rear bumper can handle light contact better than the factory plastic bumper, but it is not a guarantee against damage. A hard hit can still damage the bumper, mounts, frame, or body.

How is this Toyota Tundra rear bumper protected against rust?

The BMS PRO-Line bumper comes with a black polymer coating. Extra corrosion treatment is usually not required before installation, but stones, sand, road salt, and trail debris can damage the finish over time. Inspect the bumper after hard use and touch up damaged areas when needed.