Rear Bumper PRO-Line for Jeep Gladiator JT 2019-2026

Add stronger rear-end protection and a cleaner, more functional setup to your 2019–2026 Jeep Gladiator JT with the BMS PRO-Line steel rear bumper.

The Gladiator brings together what Jeep owners like most: real off-road character, open-air adventure attitude, and the everyday usefulness of a pickup bed. But that longer rear section also means the factory rear bumper is easier to put at risk. A steep trail exit, a deep rut, a tight forest turnaround, or one careless reverse maneuver can quickly put the back of the truck into contact with the ground or an obstacle.

The BMS PRO-Line aftermarket rear bumper gives the Gladiator a stronger steel setup while keeping the look clean and well matched to the vehicle. It helps protect the rear of the truck and keeps recovery function where it belongs – built into the bumper and ready when the route gets difficult.

Before ordering, choose the version that matches your Jeep’s factory rear tow hook setup: one tow hook or two tow hooks. That way the bumper fits the actual configuration of your Gladiator instead of forcing a one-size-fits-all solution.

The bumper installs without vehicle modifications and keeps the truck bed easy to use. The tailgate opens normally, and the center section works as an integrated step when you need quick access to cargo, tools, or trail gear.

The BMS PRO-Line rear bumper adds protection, utility, and a premium visual upgrade without taking away from the Gladiator’s identity. It looks purposeful on the Jeep, supports the way the truck is actually used, and gives the rear end a more complete, capable finish.

PRODUCT DETAILS:

Laser cut for accuracy and precision
Manufacturer Part Number: BMS060175
Application: Jeep Gladiator JT 2019-2026 2nd generation
Installation method: fully bolt on
Mounting kit: included
Features of the complete set: The set includes an off-road bumper, mounting brackets, bolt kit, certificate of conformity, license plate light, and 1 pc AURORA LED light ALO-E-2-D1D1. The LED light is not included if the bumper version for a vehicle with 2 OEM tow hooks is selected
Winch mount: not present. Winch installation is possible only after major custom vehicle modifications
Fairlead stencil: present
Light slots: 1 slot, WxHxD: 122.5×91.5×83.4 mm. Not present if the bumper version for a vehicle with 2 OEM tow hooks is selected
Slots for parktronic sensors: present as a stencil
Hi-Lift jack points: not present
OEM tow hook slots: present, 1 or 2 options available
Package size: 182x45x37 cm
Package weight: 25 kg

TECH SPECS:

Color: Black powder coating finish
Bumper material: 3 mm steel A 620
Brackets material: 4 mm steel A 516-55

FAQ

Is a heavy duty rear bumper useful for regular weekend driving?

Yes. Rear-end protection is not only for extreme off-road use. Even if your Jeep Gladiator mostly sees highways, country roads, and weekend trips, the factory rear bumper can still be damaged by a careless driver, a tight reverse maneuver, or an unexpected obstacle. The BMS PRO-Line steel rear bumper adds stronger protection before that damage happens.

What should I check before ordering?

Before ordering, choose the version that matches your factory rear tow hook setup: one tow hook or two tow hooks. Different Jeep Gladiator trims can have different rear tow hook configurations, so checking this in advance helps make sure the BMS PRO-Line rear bumper matches your vehicle.

Is any cutting or drilling required for installation?

No. The BMS PRO-Line rear bumper installs without frame drilling or body trimming. If your Gladiator has already seen mud, sand, road salt, or rough trails, inspect the factory mounting points and clean the installation areas before fitting the new bumper.

Can I install this bumper myself?

Self-installation is possible if you have the right tools, experience, and a good understanding of bumper mounting points. The bumper does not require vehicle modifications, but it still needs to be aligned, secured properly, and set up with the parking sensors if your Gladiator has them. For the best fit, professional installation is recommended.

Will the factory parking sensors still work?

Yes. The bumper includes parking sensor openings covered with template plugs. If your Jeep Gladiator has rear parking sensors, they can be transferred into the BMS PRO-Line bumper. If sensors are not used, the plugs can stay in place for a clean finished look.

Is this bumper good for hunting, fishing, and overland trips?

Yes. The BMS PRO-Line rear bumper is a practical upgrade for a Gladiator used beyond city driving. On hunting trips, fishing routes, forest roads, or long-distance travel, the rear of the truck can be exposed to steep terrain changes, hidden rocks, and tight turnaround spots. This steel rear bumper helps add protection without making the Gladiator look like an extreme custom build.

How is the Gladiator rear bumper protected against corrosion?

The BMS PRO-Line bumper is treated with a zinc-containing primer and finished with a black polymer coating. The coating helps protect the steel from moisture and dirt, but rocks, sand, branches, and road salt can still damage the finish over time. Inspect the bumper after rough trips and touch up deep chips or scratches when needed.

Can this rear bumper be used on public roads?

This is an aftermarket rear bumper, and road-use rules can vary by location. If your Jeep Gladiator is driven on public roads, check local requirements before installation.