Front Bumper BMS ALFA for Toyota Prado 150 2009-2017

Stronger front-end protection, improved approach clearance, built-in recovery points, and winch-ready capability give the 2009–2017 Toyota Land Cruiser Prado 150 a more capable front-end setup.

The Prado 150 is a comfortable, long-lasting SUV that works equally well in the city and beyond it. It suits family trips, outdoor recreation, and long-distance travel, but many owners find that its off-road capability is held back by the factory front bumper. The long overhang can catch on rough ground or at the start of a steep climb, while the plastic construction offers limited protection against hidden obstacles.

The BMS ALFA steel front bumper is stronger than the factory plastic bumper and better suited to travel beyond paved roads. Its shape improves approach clearance, helping the Prado catch the ground less often in deep ruts, on climbs, and across sharp terrain changes.

Built-in recovery points provide a clear place to attach compatible shackles and recovery gear when the SUV becomes stuck. The recovery line can be connected directly to the bumper without searching for the factory tow point underneath the vehicle.

Installation requires trimming the lower section of the factory plastic bumper, so professional fitting is recommended. In return, the Prado gains a full winch-ready front bumper with a built-in winch mount. This adds a valuable self-recovery option for country roads, remote travel, and even familiar routes that become difficult after heavy rain.

The BMS ALFA aftermarket front bumper strengthens the Prado 150 without taking away from its classic, well-balanced design. It adds practical capability and confidence for everything from relaxed weekend trips to demanding expedition routes.

PRODUCT DETAILS:

Laser cut for accuracy and precision
Manufacturer Part Number: BMS060084
Application: Toyota Land Cruiser Prado 150 2009-2017 4th generation, pre-restyle and 1st facelift
Installation method: requires cutting the lower section of the OEM bumper
Mounting kit: included
Features of the complete set: The set includes an off-road bumper, mounting brackets, bolt kit, bull bar, product passport, 2 pcs recovery points, and washer tank protection plate
Winch mount: present
Compatible winch: WARN VR EVO 10-S, WARN VR EVO 12-S with synthetic cable, and analogues
Light slots: WxHxD: 95x60x75 mm
Slots for parktronic sensors: present as a stencil
Hi-Lift jack points: not present
Body lift compatibility: not provided
Package size: 202x40x69 cm (79.5×15.7×27.2 in)
Package weight: 76 kg (167.6 lb)

TECH SPECS:

Color: Black powder coating finish
Bumper material: 4 mm steel A 516-55
Brackets material: 6 mm steel A 516-55
Bull bar material: D45x2.5 SAE 1020 steel tube

FAQ

Will this bumper fit a pre-facelift Prado 150?

Yes. The BMS ALFA front bumper fits both the pre-facelift 2009–2012 Toyota Land Cruiser Prado 150 and the first facelift produced from 2012–2017. Later Prado 150 models require a different compatible bumper from the BMS Engineering catalog.

Will the factory parking sensors work with this bumper?

Yes. The factory parking sensors can be transferred into the BMS ALFA bumper. The sensor openings are closed with stencils that can be removed during installation. If parking sensors are not being installed, the stencils can remain in place for a clean finished look.

The sensors usually operate normally after being transferred, though sensitivity adjustment or recalibration may occasionally be required.

What modifications are required during installation?

Installation requires carefully trimming the lower section of the factory plastic bumper. Retaining the upper factory section helps keep the BMS ALFA bumper lighter and gives the finished front end a cleaner, less bulky appearance.

Accurate trimming and alignment are important for maintaining even gaps between the factory plastic and the steel bumper, so professional installation by an experienced shop is recommended.

How should I choose a winch for the Toyota Land Cruiser Prado 150?

Choose the winch according to the Prado’s fully loaded weight and intended use. The BMS ALFA bumper includes a built-in winch mount for hidden installation and is compatible with WARN VR EVO 10-S and WARN VR EVO 12-S winches with synthetic rope, as well as similar models.

For a fully loaded Prado 150 or more demanding recovery situations, the WARN VR EVO 12-S provides a greater pulling reserve. When choosing another brand, compare the winch dimensions and mounting pattern with the bumper before installation to avoid additional modification.

How can I recover a stuck Prado 150?

If another capable vehicle is available, a properly rated recovery strap can be attached to the built-in recovery points on the BMS ALFA bumper. If the Prado must recover itself, a winch installed inside the bumper provides a useful alternative.

Keep the pulling force as straight as possible along the vehicle’s frame and avoid sudden side loads. Properly rated recovery pulleys or snatch blocks can be used when the direction of pull needs to be adjusted.

Can I lift the Toyota Prado 150 with a Hi-Lift jack using this bumper?

If the Prado 150 is stuck in a deep rut, an experienced user may carefully lift the vehicle and reposition it. The lifting point depends on the situation; one option is to transfer the load through a built-in recovery point using a soft shackle.

This is an emergency recovery method that should only be considered when safer options have not worked. The bumper does not include dedicated Hi-Lift jack slots. A Hi-Lift jack can become unstable, slip, damage the vehicle, or cause serious injury, and there is also a risk of damaging the bumper coating.

How can I protect the steel bumper from rust?

The black polymer coating helps protect the steel from direct contact with moisture and dirt, but sand, rocks, and road salt can damage the finish over time.

After driving through mud, on gravel roads, or in winter conditions, rinse the bumper thoroughly, paying attention to joints, mounting areas, and hard-to-reach sections. Inspect the surface regularly, and clean, treat, and touch up chips or scratches before corrosion develops.

Will the bumper protect the Prado from rocks or fallen trees?

The BMS ALFA steel front bumper is stronger than the factory plastic bumper and can help reduce damage to the radiator, grille, lights, and other front-end components during contact with rocks, stumps, fallen branches, or similar obstacles.

It does not provide complete protection. A strong impact can still damage the bumper, mounting brackets, body, frame, and components behind it.

Is this bumper useful for remote mountain and forest travel?

It is not essential if the entire route stays on pavement and ends at a developed tourist destination. Its advantages become more useful on remote access roads leading to lakes, campsites, trailheads, and other locations away from maintained roads.

After rain, these routes may develop washouts, deep ruts, exposed rocks, and roots that are difficult to see in advance. Improved approach clearance helps the Prado move over uneven terrain more easily, while the steel bumper provides stronger protection than the factory plastic.

Can this bumper be used on public roads?

This is an aftermarket front bumper, and road-use rules can vary by location. If your Toyota Land Cruiser Prado 150 is driven on public roads, check local requirements before installation.